Free Estimates
Standard Plumbing Heating & Air Conditioning
Free Estimates

Drain Tile Systems

If you ask most homeowners to name one place in their home that has water leaking problems, it is almost always the basement. Whether finished or unfinished, the basement tends to represent the least maintained and worst drained room in the house. But, it does not have to be that way. There are simple technologies that help to remove excess and standing water from the basement before it becomes an issue.

Drain tile systems are just such a technology and though they are not only easy to install, they can be maintained for long periods of time without replacement or heavy repair. Of course, for your drain tile system to be effective, it needs to be installed properly, and that is where Standard Plumbing, Heating & Air Conditioning can help.

For many years, we have helped people living in the Manhattan, KS area take care of leaky basement problems brought on by low grade, poor insulation or bad outside drainage. Our experienced drainage technicians will help you to not only choose the drain tile for your basement, but they’ll install it right the first time.

How Do Drain Tiles Work?

Drain tile systems work with a variety of components installed in the flooring of your basement. The drain tile is a simple four inch wide pipe with holes drilled into it to funnel water through its length. The pipes are set into gravel in your basement flooring.

Gravel is important because it is more porous than soil. It allows water to more freely flow than soil or sediment can, thereby drawing the water through. When water has a choice between thick, hard soil and porous, loose gravel, it will travel the path of least resistance. The system is then covered to keep the pipe from getting clogged by debris or sediment in the area.

The water outlet is placed as far from your home as possible, preferably at a downgrade so it can run off into a sewer grate or down the hill away from your home. The outlet should also come out into the air so that the water will be pulled away from its entry point. Sump pumps can be used to supplement this system if you live on flat ground or if your home is at the bottom of a hill or you simply do not want to pour water into your neighbor’s yard.

Installing Your Drain Tile System

Installation of a drain tile system is a complex process. The location of the drain tiles must be carefully measured to capture as much water as possible before it can enter your basement. The drainage system must also be efficient at removing the water from your drain tiles and ensuring it is displaced somewhere both safe.

Most modern homes with finished basements have a drain tile system installed when the home is built, but existing homes or those built quickly and with minimal extras may not and that will require a great deal of careful remodeling in and around your basement. For all these reasons, it is important that the installation process is done by a trained professional who has worked in this field for many years.

Standard Plumbing provides drain tile systems for customers all over the Manhattan, Kansas metropolitan area. Our team of trained technicians has installed drain tiles and helped seal up basements of all shapes and sizes throughout the region. If you’re ready to finally put a stop to the leaky basement you have been fighting since you moved in, call us today and learn how an effective drain tile system can finally solve your problems.
Website designed & hosted by Outdoor Resources, LLC
Copyright © 2018 Standard Plumbing Heating & Air Conditioning.
facebook Google+